Candy-Making Basics: How to Work with Sugar (2024)

Emma Christensen

Emma Christensen

Emma is a former editor for The Kitchn and a graduate of the Cambridge School for Culinary Arts. She is the author of True Brews and Brew Better Beer. Check out her website for more cooking stories

updated May 3, 2019

pinterest

email

comments

We independently select these products—if you buy from one of our links, we may earn a commission. All prices were accurate at the time of publishing.

Candy-Making Basics: How to Work with Sugar (1)

As we mentioned in our post on crystallized sugar syrup, candy-making is a brand new culinary adventure for us. We’re teaching ourselves the basics and look forward to sharing our triumphs and pitfalls with you. We certainly hope you’ll chime in with advice and questions! First up, we have some basic tips for working with sugar…

Dealing with sugar and all it’s quirks is pretty much par for the course when it comes to making candy. The thing to remember is that sugar always wants to re-crystallize and will do so at the least provocation.

The tips below will help avoid a mess of crystallized sugar when you’re melting sugar into a syrup:

Use the right sized pot. Whatever the amount of syrup you’re making, you want the initial sugar and water mixture to come about halfway up the sides of the pot. If it’s too small, cooking sugar takes forever and you risk it boiling over. Use too large a pot and the sugar will cook so quickly that you’re likely to overcook it.

Medium to high heat is ideal for boiling sugar. Again, too low and it takes forever; too high and it cooks too quickly.

Combine your sugar and water off the heat, and stir it just until the sugar is evenly moistened.

Avoid stirring the sugar if at all possible once you put it on the stove. Agitation can cause the sugar to crystallize.

If you have to stir it, use a clean stainless steel spoon. If you use the same spoon, the temperature difference between the residual sugar on the spoon and the boiling sugar can cause it to crystallize. Also, spoons made from other materials like wood or plastic could have foreign particles or residual fats on their surface that could (you guessed it) cause the sugar to crystallize.

Use a pastry brush dipped in water to wipe down the sides of the pot during the first few minutes of cooking. If the sugar mixture sloshed onto the sides of the pot, you’ll want to wipe down the spatter. The best way to do this is by dipping a pastry brush in a little water and running it lightly around the interior of the pan just above the sugar-line. The water won’t cause the sugar to crystallize.

Use an interfering agent to prevent crystallization. Interfering agents are usually acids like lemon juice, vinegar, or cream of tartar. These interrupt the binding process of the sugar crystals and help prevent crystallization. Just a teaspoon or two should do the trick.

Watch the pot of boiling sugar like a hawk. Sugar can be slow to get going, but once it reaches a full boil, it can move swiftly through the stages. A candy thermometer helps you keep an eye on how fast the temperature is rising. Until we feel more comfortable recognizing the stages of sugar, we’ll try to resist our usual multi-tasking tendencies and stay close to the stove!

We’ll talk about how to recognize these stages and what we can do with the sugar at each stage in some of our future posts.

Until then, any extra words of advice for those of us just starting out with sugar? Or questions from fellow newbies?

(Image: Emma Christensen for the Kitchn)

Candy-Making Basics: How to Work with Sugar (2024)

FAQs

Should you stir sugar when making candy? ›

Combine your sugar and water off the heat, and stir it just until the sugar is evenly moistened. Avoid stirring the sugar if at all possible once you put it on the stove. Agitation can cause the sugar to crystallize. If you have to stir it, use a clean stainless steel spoon.

Why is my candied fruit not hardening? ›

If your candied coating isn't hardening, the candying mixture did not reach a high enough temperature. Allow your candying mixture to cook until it bubbles, thickens, and turns a rich golden color, sort of like caramel. Then, quickly turn off the heat so it doesn't burn.

Why is my sugar glass not hardening? ›

Keep heating and stirring your candy until it reaches 300°F (148.89°C). This is very important. If you don't get your mixture hot enough, it won't harden properly. Your candy will be soft and sticky, no matter how long you let it sit, harden, or cool.

How do you get to hard crack without burning it? ›

Hard-Crack Stage

Drop a little of the molten syrup in cold water and it will form hard, brittle threads that break when bent. CAUTION: To avoid burns, allow the syrup to cool in the cold water for a few moments before touching it! Toffee, nut brittles, and lollipops are all cooked to the hard-crack stage.

What happens if you stir sugar? ›

Stirring helps to increase the interaction between sugar molecules and water molecules, which causes sugar molecules to break away from each other. Hence they get dissolved faster. Q. When sugar is stirred with a spoon in a glass of water, more sugar is dissolved and faster.

How do you keep sugar from crystallizing when making candy? ›

Corn syrup contains glucose, which has enough acid to prevent re-crystallization during the cooking process. It is an excellent addition to sugar when making cara- mel, brittle, and hard candies.

What does corn syrup do in hard candy? ›

Provides Smooth Texture: Corn syrup helps to create a smooth and glossy texture in candies, ensuring that they are not grainy or gritty.

Why is my homemade hard candy sticky? ›

Why is my hard candy soft and sticky? The simple answer is that there is too much moisture in your candy. One or more factors could be contributing to this problem. In hard candy making, it is important to cook all the water out of the sugar/corn syrup/water mixture.

How to make homemade hard candy not sticky? ›

Drop the pieces onto the buttered baking sheet. If the candy cools too quickly, set it on a saucepan over hot water to soften it, but if it gets sticky, return at once to the work counter. Toss in a small amount of powdered sugar to keep from sticking together. Repeat with the second pan of candy.

How do I keep my sugar from hardening? ›

Cover sugar with two pieces of dampened – not dripping, wet paper towels placed over a small piece of plastic wrap or foil on top of the sugar. Or you can also use a slice of bread to add the bowl of sugar. Place lid on container and seal tightly.

How long does sugar glass take to set? ›

Make sure the pan is level. The thinner you spread it out the thinner the glass will be. Then wait for it to set. This usually takes an hour or two.

Why do candy makers stretch candy? ›

💙 Why do we stretch our candy? This process adds air into the existing candy. With. aerating, the candy expands with air pockets which.

How long does it take for candy to get to the hard crack stage? ›

Continue boiling, uncovered, not stirring the mixture but shaking the saucepan occasionally to distribute the heat as the mixture turns amber in about 9 minutes, then darker amber as it registers 305 degrees on the thermometer (hard-crack stage ), about 3 minutes longer.

Why is my hard candy grainy? ›

If your hard candy tastes grainy, you're likely re-introducing crystalized sugar into a pot of liquid candy.

What is the hard ball stage for candy? ›

If the candy forms thick threads when it drips from the spoon, it is in the hard ball stage or 250°—265°F. If you gather the candy mixture into a ball it will be a hard ball. Divinity or rock candy is typically cooked to this stage.

Are you supposed to stir sugar when making caramel? ›

Caramel is made by heating sugar (either with a liquid or by itself, more on that below!) in a heavy-bottomed saucepan until it melts and becomes clear. The liquefied sugar is then cooked, without stirring, until it darkens in color, taking on additional flavor notes the longer it remains on the heat.

Do you stir sugar when boiling it? ›

Measure the sugar: Depending on your recipe, measure the required amount of sugar and place it in the saucepan. Heat it up: Set the saucepan over medium heat and let the sugar melt, stirring occasionally with a heat-resistant spatula or wooden spoon.

Why won't my homemade candy harden? ›

If the sugar mixture is not cooked to the proper temperature (the hard-crack stage 300-310° F {149-154° C.} or if you are working in a kitchen with high humidity, chances are your candy is retaining too much moisture.

Top Articles
Latest Posts
Article information

Author: Aracelis Kilback

Last Updated:

Views: 6451

Rating: 4.3 / 5 (44 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Aracelis Kilback

Birthday: 1994-11-22

Address: Apt. 895 30151 Green Plain, Lake Mariela, RI 98141

Phone: +5992291857476

Job: Legal Officer

Hobby: LARPing, role-playing games, Slacklining, Reading, Inline skating, Brazilian jiu-jitsu, Dance

Introduction: My name is Aracelis Kilback, I am a nice, gentle, agreeable, joyous, attractive, combative, gifted person who loves writing and wants to share my knowledge and understanding with you.